Manual
English
17
Reset to Default
This section allows you to restore the Wireless Projector Server to its’ default factory settings
•
Click Apply to restore the factory default settings
Firmware Upgrade
This section shows further information about your Firmware Version and allows you to upgrade
the Wireless Projector Servers Firmware
To upgrade the Wireless Projector Servers Firmware;
1. Download the latest Firmware Image file from the Lindy Web site
2. Browse for the downloaded Firmware Image on your computer and click the Upgrade
button in the Wireless Projector Server Web Admin Management Page to start the install
Manual
English
18
3. A warning message will show with a countdown
4. After a few minutes, a complete message will be shown on screen
5. Restart the Wireless Projector Server for any changes to take effect
Important
DO NOT TURN OFF THE POWER SUPPLY UNTIL THE RESTART COMPLETES
Reboot System
This section gives you the option of remotely rebooting the Wireless Projector Server
1. Click Reboot to reboot the Wireless Projector Server
2. The Wireless Projector Server with immediately start to reboot
Important
DO NOT TURN OFF THE POWER SUPPLY UNTIL THE RESTART COMPLETES
