User Manual English
5.0 Configurations
5.1 System Information
The system configuration screen below shows the details and the status of the switch.
If any changes are made you must choose “Apply” for the changes to take effect.
Pressing the “Refresh” button will update the status of the system information
5.2 DHCP
By default DHCP is turned off, so a Default IP or user defined IP address is used
when the switch is turned on. If the switch needs an IP assigned from a DHCP server,
then tick the “DHCP Enabled” box and click on “Apply”.
Note: if you are in web page
mode, connection to the switch will be lost. You will need to log back into the
system configuration using the new IP address provided by the DHCP Server.
