2-2035 Fisher Dr., Peterborough, ON CANADA K9J 6X6 Ph: (705) 742-1350 or (800) 465-7046 Email: [email protected]
9
|
P a g e
LB-1000-RR
User Manual
Laser Temperature
Shows the laser temperature (°C)
Gain Mode AGC / MGC
Select Automatic or Manual Gain Control mode for the receiver. Only in
Standard version of RRx. RFoG version of RRx is only MGC mode.
RF TP A / B / C / D
Select RF Output Test Point for one of the four channels
AB / CD Switcher
For special functional module only, special order. Not a standard feature
of the return receiver. Select main channel for back up operating mode.
Low-Cut Mode ON / OFF
Enable or Disable optical protection mode. Optical/RF channel turned OFF
when optical power below a certain level. Only for Standard version. This
setting is not available in RFoG version of RRx.
Thr / -
Set Optical threshold level for Low-Cut Mode. Min value: -21dBm; Max
value: -14dBm. Only for Standard version. This setting is not available in
RFoG version of RRx.
Serial Number
Shows the module serial number
Hardware Version
Shows the hardware version
Firmware Version
Shows the firmware version
Temperature
Shows the current module temperature (°C)
Running Time
Shows the active run time of the module
Figure 5: LB-1000-RR settings - Page 2
