URRACO 75 D
C
LEANING THE
S
HREDDER
Managing director
LINDNER
Mobile Shredder GmbH
Industriestrasse 1A
D-99820 Hörselberg / Eisenach
Service hotline:
+49 (0) 36920 - 7269 - 600
Manuel Lindner
Gerhard Buhl
Walter Geiger
Page - 7 - of - 8 -
1.8.-4
Cleaning the Air Filter
Clean and inspect the filter elements as described in the Operating and
Maintenance Manual for the drive engine.
The filter elements can be cleaned with compressed air (max. 207 kPa - 30 psi).
Carefully clean the filter element inside and outside by blowing or vacuum-cleaning them
along the length of the fins.
After cleaning, check the filter elements for cracks and other damage. For this purpose,
shine a light into the clean, dry element and check whether the light shines through any
cracks.
Do not use any filter elements with damaged fins or seals. Replace damaged elements.
Wrap up clean filter elements and store them in a clean, dry place.
1.8.-5
Area between Gearbox and Shredder Housing
Regularly clean the area between the gearbox and shredder housing. Remove contaminants
and do not allow dirt to gather. Dirt causes friction and thus will damage the gearbox in the
course of time.