Linder URRACO 75 D, Руководство пользователя

Страница: 5 / 8

URRACO 75 D C
LEANING THE
S
HREDDER
Managing director
LINDNER
Mobile Shredder GmbH
Industriestrasse 1A
D-99820 Hörselberg / Eisenach
Service hotline:
+49 (0) 36920 - 7269 - 600
service@l-ms.de
Manuel Lindner
Gerhard Buhl
Walter Geiger
Page - 5 - of - 8 -
1.8.-2 Cleaning the Cooler
Dust between the cooler fins can lead to excessively high operating temperatures. The
cooler must therefore be cleaned regularly.
Cleaning procedure on the air side:
1. In order to clean the cooler, the air baffle
in front it must be removed first.
2. Cleaning the cooler fins
The best way to clean the cooler fins is by
washing them out with hot, degreasing,
neutral cleaning agents for non-ferrous
metals. The cleaning agent may not damage
the exterior paintwork.
If the fins are soiled with insects or heavy
dust accumulation, it should be sufficient to
blow them off with compressed air.
The fins are made of 0.5 mm sheet metal and can be damaged by improper
treatment with brushes that are too hard.
Before using compressed air / water jets, ensure that you comply with the
device-specific regulations. Wear suitable personal protective equipment.
Air baffle