Linde G-TECTA 4G Скачать руководство пользователя страница 22

22

The Linde Group Instrumentation 

Warranty Gas Detection Products 

General

The Linde Group warrants gas detectors, sensors 
and accessories manufactured and sold by 
The Linde Group to be free from defects in 
materials and workmanship for the periods listed 
in the following tables. Damages to any Linde 
Group products that result from abuse, alteration, 
power fluctuations including surges and lightning 
strikes, incorrect voltage settings, incorrect 
batteries, or repair procedures not made in 
accordance with the product’s Operating Manual, 
are not covered by The Linde Group warranty.

The obligation of The Linde Group under this 
warranty is limited to the repair or replacement of 
components deemed by The Linde Group Service 
Department to have been defective under the scope 
of this standard warranty. To receive consideration 
for warranty repair or replacement procedures, 
products must be returned with transportation and 
shipping charges prepaid to The Linde Group, or to 
a Linde Group Authorised Warranty Service Centre. 
It is necessary to obtain a return authorisation 
number from The Linde Group prior to shipment.

THIS WARRANTY IS EXPRESSLY IN LIEU OF 
ANY AND ALL OTHER WARRANTIES AND 
REPRESENTATIONS, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO, THE WARRANTY 
OF FITNESS FOR A PARTICULAR PURPOSE. THE 
LINDE GROUP WILL NOT BE LIABLE FOR LOSS OR 
DAMAGE OF ANY KIND CONNECTED TO THE USE OF 
ITS PRODUCTS OR FAILURE OF ITS PRODUCTS TO 
FUNCTION OR OPERATE PROPERLY.

Warranty periods for instruments  

and accessories

Product

Warranty period

G-TECTA

®

 SG 

G-TECTA

®

 4G

G-TECTA

®

 4GP

2 years from 
date of purchase

G-TECTA

®

 SG

2

2 years from 
date of purchase

G-DOCKA

®

 SG

2

1 year from 
date of purchase

G-DOCKA

®

 Hub

2 years from 
date of purchase

Instrument chargers/interfaces

2 years from 
date of purchase

Battery packs, pumps and consumables 1 year from 

date of purchase

Warranty periods for sensors

Sensor type

Warranty period

Oxygen & Flammable Sensors

2 years

H

2

S & CO Toxic Sensors

2 years

All other Toxic Sensors

1 year

** Damage to combustible gas sensors by acute or chronic 
exposure to known sensor poisons such as volatile lead 
(aviation gasoline additive), hydride gases such as phosphine, 
and volatile silicone gases emitted from silicone caulks/
sealants, silicone rubber moulded products, laboratory glassware 
greases, spray lubricants, heat-transfer fluids, waxes and 
polishing compounds (neat or spray aerosols), mould-release 
agents for plastics injection-moulding operations, waterproofing 
formulations, vinyl and leather preservatives, and hand lotions 
that may contain ingredients listed as cyclomethicone, dimethicone 
and polymethicone (at the discretion of The Linde Group Service 
department) void The Linde Group’s Standard Warranty as it applies 
to the replacement of combustible gas sensors.

Содержание G-TECTA 4G

























Отзывы: