Linde E 20-02, Руководство по эксплуатации

Страница: 67 / 96

65
336
804
3001.0704
e336-02/47
3
2
1
Check the security of the hydraulic oil tank
- Open the overhead guard to the first detent position.
- Check the tension of the hydraulic oil tank (3) mounting
strap (1) and tighten with a ratchet lever (2) if required.
- Close the overhead guard.
Lubricate the steer axle, mast and tilt cylin-
der bearings
If used in clean and dry areas, truck servicing every 1000
service hours is sufficient as a rule. For mixed duty inside/
outside, cleaning and greasing between 500 and 1000 service
hours is recommanded; but it is required at least every 12
month.
In an environment with dust, dirt, water and possibly de-icing
salt or chemicals, weekly lubrication will extend the service
life of the bearings substantially.
NOTE
Greasing is always recommended after cleaning with a
steam jet.
NOTE
Preferably lubricate the bearings with less grease more
often than a lot of grease less frequently.
Inspection and maintenance as required Maintenance
Other cleaning and greasing work
If used in clean and dry areas, truck servicing every 1000
service hours is sufficient as a rule. For mixed duty inside/
outside, cleaning and greasing between 500 and 1000 service
hours is recommanded; but it is required at least every 12
month.