Linde E 20-02, Руководство по эксплуатации

Страница: 48 / 96

46
336
804
3001.0704
1
e336-02/43
2
Before loading Operation
1 Maximum load capacity in kg
2 Height of lift in mm
3 Fork truck model with maximum load capacity
4 Load centre distance from fork-face in mm
Example E 25/600
Load centre distance: ............................................... 700 mm
Height of lift: ............................................................ 6500 mm
- Follow the vertical line for a load centre distance of 700
mm to the point where it intersects the line for a lift height
of 6500 mm.
- Follow the horizontal line at the point of intersection to the
left to read the maximum load capacity.
- In this case the maximum load is ....................... 1300 kg
Proceed in the same manner for other heights and load centre
distances. The values in the diagram apply to both forks and
even distribution of loads.
Check the load capacity diagram (1) before picking up a load.
If attachments are fitted, first check the respective load
capacity plate (2).
DANGER
The weights given in the load capacity diagram
and plate are only applicable to compact and
homogeneous loads. Never exceed the load capacity of
the lift truck. Overloading will reduce truck stability and
the strength of forks and mast.
The maximum load capacity is governed by the height of lift
and the load centre distance.
NOTE
- Before transporting off-centre or swinging loads,
- before transporting loads with the mast tilted forward
or the load not near the ground,
- loads with a large load centre distance,
- before operating attachments,
- with wind force 6
check the load limits and contact your authorised distrib-
utor.
e336-02/72
1
2
3
4