English
9
English
Depending on welding machine, the user can set
functions:
SPEEDTEC 180C
•
The welding current
•
HOT START
•
ARC FORCE
SPEEDTEC 200C
Basic menu
Advanced menu
•
The welding current
•
Switch on / switch off
the output voltage on
the output lead
•
The welding current
•
Switch on / switch off
the output voltage on
the output lead
•
HOT START
•
ARC FORCE
Welding GTAW Process (only
SPEEDTEC 200C)
SPEEDTEC 200C
can be used to GTAW process with
DC (-). Arc ignition can be achieved only by lift TIG
method (contact ignition and lift ignition).
SPEEDTEC 200C
does not include the torch to GTAW
welding, but the one can be purchased separately. See
"Accessories" chapter.
Procedure of begin welding of GTAW process:
•
First turn the machine off.
•
Connect GTAW torch to [9] output socket.
•
Connect the work lead to [8] output socket.
•
Connect the work lead to the welding piece with the
work clamp.
•
Install the proper tungsten electrode in the GTAW
torch.
•
Turn the machine on.
•
Set the welding parameters.
•
The welding machine is now ready to weld.
•
By applying the principle of occupational health and
safety at welding, welding can be begun.
During welding GTAW process, the user can set
function:
SPEEDTED 200C
Basic menu
Advanced menu
•
The welding current
•
Switch on / switch off
the output voltage on
the output lead
•
The welding current
•
Switch on / switch off
the output voltage on
the output lead
Memory – Save, Recall, Delete (only
SEEDTEC 200C)
SPEEDTEC 200C
enables saving, recalling and deleting
the parameter’s settings. 9 memories can be used by
user.
Saving, recalling and deleting process settings is
accessible in advanced menu of
SPEEDTEC 200C
.
Error’s Message (only SPEEDTEC
200C)
Contact with the Technical Service Center or Lincoln
Electric, when a machine’s display of
SPEEDTEC 200C
will show a message of the Figure 7 or similar.
001
Figure 7.
