System Troubleshooting
The integrated controller can diagnose certain faults and provides an indication of which
fault it is via a flashing indicator light. Here are a list of the faults and the fault indication:
Fault indication light and pushbutton
Fault Indication
Malfunction
A: LED flashes continuously for one second
ON and one second OFF
Drive motor defective or electrical line is damaged (see causes
and solutions under “A” below
LED flashes for ½ of a second ON and one
second OFF
Lubrication system malfunctioning (see causes and solutions
under “B” below
LED flashes ½ of a second ON and ½ of a
second OFF
Reservoir is empty
LED is continuously ON
Lube fault has been acknowledged by pressing the pushbutton.
Note: Fault acknowledgement does not clear the fault. Clearing
the fault is accomplished by solving the cause of the fault and
pressing the pushbutton for more than two seconds, which will
initiate a lube cycle. The fault is cleared once the system has
completed a lubrication cycle.