•
on the owner’s wallet card in the glove compartment,
•
at your dealer,
•
or on the module located under
the right-hand side of the
instrument panel, adjacent to the
passenger compartment fuse
panel.
Note:
The 5–digit code (e.g. 12345)
will be in large,
BOLD
numbers on
the module label.
When pressing the controls on the keyless entry keypad, press the
middle of the controls to ensure a good activation.
Programming your own personal entry code
To program your own code:
6. Enter factory set code (keypad will illuminate when pressed).
7. Press 1/2 control within five seconds of step 1.
8. Enter your personal 5 digit code.
Enter each digit within five seconds
of previous one.
9. After the code is entered, the
locks will cycle, confirming that the
new code has been set.
Do not set a code that includes five of the same number or presents
them in sequential order. Thieves can easily figure out these types of
codes.
2004 Navigator
(nav)
Owners Guide (post-2002-fmt)
USA English
(fus)
Locks and Security
164
Содержание NAVIGATOR 2003
Страница 367: ...367 I n f o r ma t i o nP r o v i d e db y...
Страница 368: ...368 I n f o r ma t i o nP r o v i d e db y...