5
2 0 1 7 M K X
3
Information Display
Provides information about various systems
on your vehicle. Use the left, 5-way controls
located on the steering wheel to choose and
confirm settings and messages. Refer to the
Information Displays
chapter in your
Owner’s
Manual
for more information.
4
Service Engine Soon Light
Illuminates briefly when you switch the
ignition on. If it remains on or blinks after you
start the engine, the On-Board Diagnostics
(OBD-II) system has detected a problem.
Drive in a moderate fashion and contact your
authorized dealer as soon as possible.
5
Steering Wheel Audio and Media Controls
Press
VOL +
or
–
to increase or decrease
volume levels.
Press
SEEK |⊳
or
⊲|
to access the next or
previous radio station preset, CD track or preset
satellite radio channel.
Press to access phone mode or to answer
a call.
Press
to disconnect a phone call.
Press to access voice recognition.
6
Push Button Shift Transmission
Your vehicle includes an electronic transmission.
The shift controls are on the instrument panel.
Putting Your Vehicle in Gear
A.
Fully press down on the brake pedal,
then press and release one of the
PRNDS
controls to select your gear.
B.
The selected gearshift control lights and the
information display shows the selected gear.
Release the brake pedal and your
transmission remains in the selected gear.
Note:
When entering an automatic car wash,
always
put your vehicle into
Stay in Neutral
mode. To put your vehicle in
Stay in Neutral
mode, make sure your vehicle is stationary first,
and then:
A.
Press the neutral (N) button once. The
information display prompts you to press
the neutral (N) button again to enter into the
Stay in Neutral
mode.
B.
Press the neutral (N) button again. The
message display confirms when your
vehicle enters into the
Stay in Neutral
mode
. The neutral (N) control flashes
continuously to confirm your selection.
To exit
Stay in Neutral
mode, fully press down
on the brake pedal, then press and release
another gear. Release the brake pedal and your
transmission remains in the selected gear.
7
Keyless Starting
Allows you to start your vehicle by pressing the
START STOP
button while fully pressing down
on the brake pedal. Press the button again to
switch the engine off.
Note:
A valid key must be located inside
your vehicle to switch the ignition on and
start the engine.
8
Parking Aid Features
See pages 16 and 17 for more information.
9
Hazard Warning Control
10
Auto Hold
See page 15 for more information.
11
Locking Glove Box
See page 12 for more information.
Instrument Panel
1
Power Adjustable Column
*
Use the 4-way control to adjust the steering wheel to your desired position.
2
Electric Parking Brake
The operating switch
replaces the conventional handbrake. It is to the
left of the steering column. To use, pull the switch up. The brake system
warning lamp lights to confirm that you applied the electric parking brake.
To release the electric parking brake manually, switch the ignition on, press
the brake pedal and then press the electric parking brake switch down.
Your vehicle can automatically release the electric parking brake after
you close the driver door and accelerate, and the system does not detect
any faults. If the electric parking brake warning lamp remains lit, you must
release the electric parking brake manually. Refer to the
Brakes
chapter of
your
Owner’s Manual
for more information.
4
*if equipped
