To replace the battery:
1. Twist a thin coin in the slot of the
IKT near the key ring in order to
remove the battery cover.
2. Do not wipe off any grease on the
battery terminals on the back
surface of the circuit board.
3. Remove the old battery.
Note:
Please refer to local regulations when
disposing of transmitter batteries.
4. Insert the new battery. Refer to the instructions inside the IKT for the
correct orientation of the battery. Press the battery down to ensure that
the battery is fully seated in the battery housing cavity.
5. Snap the battery cover back onto the key.
Note:
Replacement of the battery will
not
cause the IKT to become
deprogrammed from your vehicle. The IKT should operate normally after
battery replacement.
Replacing lost Integrated Keyhead Transmitters (IKTs)
If you would like to have your Integrated Keyhead Transmitters
reprogrammed because you lost one, or would like to buy additional
IKTs, you can either reprogram them yourself, or take
all IKTs
to your
authorized dealer for reprogramming.
How to reprogram your Integrated Keyhead Transmitters (IKTs)
To program a new Integrated Keyhead Transmitter yourself, refer to
Programming spare keys
in the
SecuriLock
娂
passive anti-theft
section of this chapter.
Note:
At least two IKTs are required to perform
this procedure yourself.
2007 MKX
(mkx)
Owners Guide (post-2002-fmt)
USA
(fus)
Locks and Security
119
Содержание MKX 2007
Страница 318: ...318 I n f o r ma t i o nP r o v i d e db y...
Страница 319: ...319 I n f o r ma t i o nP r o v i d e db y...
Страница 320: ...320 I n f o r ma t i o nP r o v i d e db y...