The tether strap anchors in your vehicle are
in the following positions (shown from top
view):
E142537
Perform the following steps to install a child
safety seat with tether anchors:
Note:
If you install a child seat with rigid
LATCH attachments, do not tighten the tether
strap enough to lift the child seat off your
vehicle seat cushion when the child is seated
in it. Keep the tether strap just snug without
lifting the front of the child seat. Keeping the
child seat just touching your vehicle seat gives
the best protection in a severe crash.
1.
Route the child safety seat tether strap
over the back of the seat.
E173198
2. Locate the correct anchor for the selected
seating position, then open the tether
anchor cover.
E173199
3. Open the tether anchor cover.
E173200
4. Clip the tether strap to the anchor as
shown.
5. Tighten the child safety seat tether strap
according to the manufacturer's
instructions.
If your child restraint system is equipped with
a tether strap, and the child restraint
manufacturer recommends its use, we also
recommend its use.
22
MKS (CLE) Canada/United States of America, enUSA, First Printing
Child Safety
Содержание MKS 2016
