11. Allow the engine to idle for five minutes, add coolant to the degas bottle as needed to maintain the cold fill MAX mark.
12. Reopen the heater air bleed to release any entrapped air and close again.
On 3.9L engines
13. Maintain engine speed of 2,000 rpm for 3-5 minutes or until hot air comes from the heater.
14. Return to idle and verify hot air is still coming from the heater.
On 3.0L engines
15. Maintain engine speed of 1,500 rpm for 3-5 minutes or until hot air comes from the heater.
16. Return to idle and verify hot air is still coming from the heater.
On all engines
17. Set the heater temperature setting to 24°C (75°F) and allow the vehicle to idle for two minutes.
18. Shut the engine off and allow to cool.
19. After the engine has cooled, add coolant to the degas bottle to bring the level to the cold fill MAX mark.
3
2002 Lincoln LS Workshop Manual
6/27/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2X/~MUS~LEN/19/S...