On all engines
3. Open the heater air bleed.
4. Add coolant to the degas bottle allowing the system to equalize until no more coolant can be added.
On 3.0L engines
5. Close the engine air bleed when coolant begins to escape.
On all engines
6. Replace the degas bottle cap.
On 3.9L engines
CAUTION: Care must be taken to ensure the accessory drive belt does not become contaminated with engine coolant.
7. Add as much coolant as possible to the engine fill. The heater air bleed will remain open.
8. Replace the engine fill cap.
On all engines
9.
NOTE:
The heater air bleed remains open.
Start the engine and turn the heater to MAX position.
10. Close the heater air bleed when a steady stream of coolant comes from it, during engine idle.
3
2002 Lincoln LS Workshop Manual
6/27/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2X/~MUS~LEN/19/S...
