English
English
19
WEEE
07/06
Engl
is
h
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE)
and its implementation in accordance with national law, electrical equipment that has reached the end of its
life must be collected separately and returned to an environmentally compatible recycling facility. As the
owner of the equipment, you should get information on approved collection systems from our local
representative.
By applying this European Directive you will protect the environment and human health!
Spare Parts
12/05
Part List reading instructions
Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service
Department for any code number not listed.
Use the illustration of assembly page and the table below to determine where the part is located for your particular
code machine.
Use only the parts marked "X" in the column under the heading number called for in the assembly page (# indicate
a change in this printing).
First, read the Part List reading instructions above, then refer to the "Spare Part" manual supplied with the machine, that
contains a picture-descriptive part number cross-reference.
Electrical Schematic
Refer to the "Spare Part" manual supplied with the machine.
Suggested Accessories
KIT-200A-25-3M
Cable Kit 200A - 25 mm
2
- 3m
KIT-200A-35-5M
Cable Kit 200A -35mm
2
-5m
KIT-250A-35-5M
Cable Kit 250A -35mm
2
-5m
GRD-200A-35-xM
Ground cable 200A -35mm
2
-5/10m
K10513-17-x
TIG torch LT 17 G -140A -4/8m
K10513-9-x
TIG torch LT 9 G -110A -4/8m
K10513-26-x
TIG torch LT 26 G -180A -4/8m
K14147-1
Remote control - 15 m
K14148-1
Extension cord 15m (*)
K870 Foot
Amptrol.
(*) Only 2 Extension Cord for a maximum total length of 45m can be used.
