Lincoln IDEALARC DC-400, Руководство оператора

Страница: 24 / 42

C-2
ACCESSORIES
C-2
AMPTROL™ ADAPTER CABLE (K843)
A five wire cable, 12” (.30m) long, is available for easy
connection of standard K963 Hand Amptrol or K870
Foot Amptrol. The cable has a 6-pin MS-style connec-
tor which connects to the Amptrol and terminals which
connect to 75, 76 and 77 on the machine terminal
strip and to the case grounding screw. The Amptrol
will control the same range of output as the current
control on the welder. (If a smaller range of control is
desired for finer adjustment, a K775 Remote may be
used in conjunction with the Amptrol Adapter Cable
Kit. Connection information is included with the
Amptrol Adapter Cable Kit.) The Amptrol arc start
switch is nonfunctional in this application.
REMOTE CONTROL ADAPTER CABLE (K864)
A “V” cable 12” (.30m) long to connect a K857
Remote Control, K963 Hand Amptrol or K870 Foot
Amptrol (6-pin connector) with a wire-feeder (14-pin
connector) and the machine (14-pin connector). If a
remote control or amptrol is used alone the wire-feed-
er connection is then not used.
MULTIPROCESS SWITCH (K804-1)
Field installed kit that mounts on the front of the DC-
400, and includes hinged covers over its output studs.
The switch has three positions: Positive semiautomat-
ic / automatic, negative semiautomatic / automatic,
and stick / air carbon arc. Required when using the
DC-400 for both semiautomatic/automatic and stick /
air carbon arc. The field installed kit is equivalent to
the factory installed option. For details on the
Multiprocess Switch, see the section for Installation of
Equipment Required for Recommended Processes.
HI-FREQUENCY KIT
(K799 CODES 8634 AND ABOVE ONLY)
Kit supplies the high frequency plus gas valve for DC
TIG welding. The DC-400 is shipped with proper R.F.
bypass circuitry installed to protect the control circuit
when welding with a HI-FREQ unit. K844 Water Valve
Option Kit can be used with K799 when TIG welding
with water cooled torches.
UNDERCARRIAGES (K817, K817R, K817P K841)
For easy moving of the machine, optional undercar-
riages are available with either steel (K817) or rubber
tired (K817R) wheels or a platform undercarriage
(K841) with mountings for two gas cylinder at rear of
welder.
Install per instructions provided with trailer.
IDEALARC® DC-400
S T R A I G H T P L U G ( 1 4 P I N )
T O P O W E R S O U R C E
C A B L E R E C E P T A C L E ( 6 S O C K E T )
C A B L E R E C E P T A C L E ( 1 4 S O C K E T )
T O : 1 ) K 8 5 7 R E M O T E C O N T R O L
2 ) K 9 6 3 H A N D A M P T R O L
3 ) K 8 7 0 F O O T A M P T R O L
T O L N - 7 W I R E F E E D E R