The connector and nipple listed fit tightly onto 5/32"
(4.0mm) to 3/16" (4.8mm) inner diameter hose, but if
clamped tightly to the hose, can fit up to a .25
(6.4mm) inner diameter hose. These fittings are also
readilyavailablefromanyindustrialweldingsupplier.
K529-10 Power Input Cable with Water and Gas Hoses:
Thiscableassemblyincludesthefollowing:(1)power
cable, (1) control cable, (1) gas hose and (2) water
hoses.Thecableassemblyconnectsapowersource
to a wire feeder for water-cooled MIG applications.
The cable length is 10'. The water hoses have 5/8"-
18lefthandmalehosefittingsandthegashosehasa
5/8"-18 right hand male hose fitting. The cable and
hoselengthsaredesignedtoconnectawirefeederto
aCOOLARC
®
40thatisverticallymountedattherear
ofapowersourceonadualcylinderundercarriage.
Refer to Figure 5
foranillustrationofthisconnection.
KP504 TIG Hook Up Kit:
The Hook-Up Kit includes: (2) water hoses, (1) gas
hose,(2)wateradapterfittings,maletomale5/8"LH
thread,(1)waterhosecoupler,femaletofemale5/8"
LHthreadand(1)powercableadapter.Threadsonall
hosesandfittingsareCGAstyle.
DO NOT USE A WATER SOLENOID vALvE with
the COOL ARC
®
40. When a solenoid valve clos-
es, the pump would dead-head, causing the pump
to heat up excessively leading to premature failure
of the pump.
------------------------------------------------------------------------
Coolant Hoses:
Coolanthosesarereadilyavailablefromanindustrial
weldingsupplierorinvariousMIGorTIGhook-upkits
providedbyLincolnElectric.RefertoMagnumacces-
soryliteraturesheets.
Forlengthsofcoolanthosesover7.6m(25Ft.)andup
to 15.2m(50 Ft)., 7.9mm(5/16”) I.D. hose is recom-
mended.7.9mm(5/16”)I.D.hoseandaccommodating
fittingsareavailablefromanindustrialweldingsuppli-
er.
C-1
ACCESSORIES
C-1
OPTIONAL EQUIPMENT (Field Installed)
K559-2 Cooler Horizontal Mounting Bracket:
MountstheCOOLARC
®
40horizontallytothetopofa
powersource,securingthecoolertotheliftbale.The
kitincludesallnecessarymountinghardware.
K559-3 Cooler vertical Mounting Bracket:
Mounts the COOL ARC
®
40 vertically to a power
sourcethathasadualcylinderundercarriagealready
installed. The bracket securely mounts the cooler to
the dual cylinder support bracket. The kit includes all
necessarymountinghardware.
K1536-1 Magnum Flow Sensor:
Protects valuable torches, guns and robotic welding
systems from damage when loss of coolant flow has
occurred for any reason such as a blocked or kinked
waterlineorarupturedhose.
KP1529-1 Quick Connect Water Adapter:
Converts a male 5/8"-18 left hand hose fitting (CGA
Style) to a female quick connect fitting. The female
quickconnectmateswiththemalequickconnectson
watercooledMIGgunsorhoses.
K1859-1 Water Cooler Hoses
(5/8" LH CGA to QD):
Thiskitincludestwo25’–3/16I.D.waterhoseswitha
5/8"LHCGAstylefittingononeendandamalequick
disconnect on the other. Most wire feeders have
female quick disconnects and this kit allows direct
hookupbetweenthewatercoolerandthewirefeed-
er.
K1859-2 Water Cooler Hoses
(5/8" LH CGA to 5/8 LH CGA)
Thiskitincludestwo7.6m(25Ft.)-4.7mm(3/16”)inside
diameterhoseswitha5/8”LHCGAstylefittingonboth
ends.HosescanbematedwithKP1529-1forawater
CoolertoMIGgunapplication.IdealforwaterCooler
toMachinesorwirefeederswith5/8”LHCGAstylefit-
tings.
Field Installed CGA style hose fittings:
Fittingstoconvertastandard4.7mm(3/16")I.D.hose
toa5/8"-18lefthandmalehosefitting.Thesemalefit-
tingsmatewiththefittingsonthebackoftheCool-Arc
40.
Order the following:
(2)Connectornuts(T15007-2)
(2)nipplesfor3/16"I.D.Hose(T15008)
(2)HoseClamps(S10888-35)
COOL ARC
®
40
CAUTION
Содержание cool arc 40
Страница 26: ...P 385 A P 385 A COOL ARC 40 1 6 2014 ILLUSTRATION OF SUB ASSEMBLIES 1 1 2 2...
Страница 35: ...NOTES COOL ARC 40...
