Setting a Speed
1. Accelerate to the desired speed.
2. Press the
SET
control upward and release.
3. Take your foot off the accelerator pedal.
The indicator will change colors in the instrument cluster.
Changing the Set Speed
Note:
If you accelerate by pressing the accelerator pedal, the set speed
will not change. When you release the accelerator pedal, you will return
to the speed that you previously set.
•
Press
SET
up or down and hold to increase or decrease the set speed.
Release the control when you reach the desired speed.
•
Press
SET
up or down and release. The set speed will change in
approximately 1 mph (2 km/h) increments.
•
Press the accelerator pedal or brake pedal until you reach the desired
speed. Press
SET
up and release.
Canceling the Set Speed
Press
CNCL
or tap the brake pedal. The set speed will not be erased.
Resuming the Set Speed
Press and release
RES
.
Switching Cruise Control Off
Note:
The set speed is erased when you switch off cruise control.
Press the
OFF
control down and release or turn off the ignition.
USING ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
WARNING:
Always pay close attention to changing road
conditions, especially when using adaptive cruise control.
Adaptive cruise control cannot replace attentive driving. Failing to
follow any of the warnings below or failing to pay attention to the road
may result in a collision, serious injury or death.
Cruise Control
219
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)