Parking brake
Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.
The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned on) until the
parking brake is released.
WARNING:
Always set the parking brake fully and make sure
that the gearshift is securely latched in P (Park). Turn the
ignition to the lock position and remove the key whenever you leave
the vehicle. For vehicles with the push button start system, remove the
IA key whenever you leave the vehicle.
The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.
Press the parking brake pedal downward again to release the parking
brake. Driving with the parking brake on will cause the brakes to wear
out quickly and reduce fuel economy.
Note:
If the vehicle is driven with the parking brake applied, a chime
will sound.
ADVANCETRAC
姞
WITH ROLL STABILITY CONTROL™ (RSC
姞
)
STABILITY ENHANCEMENT SYSTEM
The AdvanceTrac
威
with RSC
威
system provides the following stability
enhancement features for certain driving situations:
•
Traction control system (TCS), which functions to help avoid
drive-wheel spin and loss of traction.
•
Electronic stability control (ESC), which functions to help avoid skids
or lateral slides
P
!
BRAKE
Driving
215
2011 MKX
(mkx)
Owners Guide, 2nd Printing
USA
(fus)