6. Within one minute, press the start/stop button. A message will be
displayed on the message center indicating that the new intelligent
access key was programmed. If four intelligent access keys have already
been programmed to your vehicle, you cannot program anymore and the
message MAX # OF KEYS LEARNED will be displayed on the message
center.
7. Remove intelligent access key from utility compartment pocket and
press the
control on the newly programmed intelligent access keys to
exit programming mode.
8. Verify that the remote entry functions operate (press lock then
unlock, making sure you end in unlock) and that the vehicle starts with
new intelligent access key.
If the intelligent access key has been successfully programmed, it can be
used to activate the intelligent access with push button start feature and
can be used to start your vehicle.
Note:
To program MyKey™ features, refer to
MyKey™
in this chapter.
PERIMETER ALARM SYSTEM
The perimeter alarm system will warn you in case of unauthorized entry
to your vehicle.
When the following types of unauthorized entry occur:
•
any door, the hood or the liftgate/trunk is opened without using the
keypad, the remote entry transmitter or the intelligent access
transmitter,
•
or if the ignition is turned on when using an invalid key,
the perimeter alarm will flash the turn signal lamps and sound the horn
up to a total of 10 times.
ARMING THE SYSTEM
The system is ready to arm whenever the ignition is off. To arm the
system, do one of the following:
•
Press the
control on the remote entry transmitter.
Note:
If you press the
control twice on the remote entry
transmitter within three seconds, the horn will chirp
once
to let you
know that all doors, the hood and the liftgate/trunk are closed. If any
of these are not closed, the horn will chirp
twice
to warn you that
they are still open.
•
Press the driver or passenger interior door lock control
while a
front door is open, then close the door.
Locks and Security
112
2011 MKX
(mkx)
Owners Guide, 2nd Printing
USA
(fus)
