Erasing HomeLink
姞
buttons
To erase the three programmed
buttons (individual buttons cannot
be erased):
•
Press and hold the two outer
HomeLink
威
buttons until the
indicator light begins to
flash-after 20 seconds. Release
both buttons. Do not hold for
longer that 30 seconds.
HomeLink
威
is now in the train (or learning) mode and can be
programmed at any time beginning with Step 1 in the
Programming
section.
Reprogramming a single HomeLink
姞
button
To program a device to HomeLink
威
using a HomeLink
威
button previously
trained, follow these steps:
1. Press and hold the desired HomeLink
威
button.
Do NOT
release the
button.
2. The indicator light will begin to flash after 20 seconds. Without
releasing the HomeLink
威
button, follow Step 1 in the
Programming
section.
For questions or comments, contact HomeLink
威
at
www.homelink.com
or
1–800–355–3515.
Car2U
姞
Home Automation System (if equipped)
The Car2U
威
Home Automation
System is a universal transmitter
located in the driver’s visor that
includes two primary features – a
garage door opener and a platform
for remote activation of devices
within the home. The Car2U
威
system’s garage door opener
function replaces the common
hand-held garage door opener with a three-button transmitter that is
integrated into the interior of your vehicle. After being programmed for
garage doors, the Car2U
威
system transmitter can be programmed to
operate security devices and home lighting systems.
Driver Controls
68
2010 Town Car
(tow)
Owners Guide, 1st Printing
USA
(fus)