2. Select FREEWAY
ENTRANCE/EXIT
The system will allow you to input of a Freeway name, and an entrance
or exit to that freeway. The entrance/exit list can be sorted alphabetically
or by distance from the vehicle position. After selecting the desired
intersection, the Destination Map will appear.
•
STATE/PROV:
Press to set the State, Province or Territory using the
keyboard or select from List . The preset value for this field is based
on current position (Auto Fill On) or previous selection (Auto Fill
Off), depending on the settings.
USA:
Select any state (except Alaska), including Puerto Rico and the
District of Colombia.
CANADA:
Select any province or territory.
•
FREEWAY:
The Smart Speller will facilitate the entry of a valid
freeway in the area specified.
•
LIST:
State/Provinces/Territories, Cities, and Names can be selected
from a list determined by the Smart Speller.
DESTINATION MAP
After the destination type has been
selected, and the necessary
information is entered, the desired
location will be shown on the
destination map. You can then plan
a route or save the location by using
one of the buttons at the bottom of
the screen:
•
SET AS DESTINATION:
Select for the system to calculate your
selected destination immediately. The SELECT ROUTE screen will
then display. Refer to
Select route
.
•
SET AS WAYPOINT:
Select for the desired location to be stored as a
waypoint. The DESTINATION/WAYPOINT LIST will then display. Refer
to
Destination/Waypoint list
.
2006 Navigator (nav)
Supplement
USA (fus)
Navigation features
47
