Operating the HomeLink
T
Universal Transmitter
Once programmed, the HomeLink
t
Universal Transmitter can be used
in place of hand-held transmitters.
To operate, simply press the
appropriate channel control on the
transmitter (the red light will
illuminate, indicating the signal is
being transmitted).
Training a rolling code system
Rolling code systems (garage door
openers which are “code
protected”) may be determined by
the following:
•
The hand-held transmitter
appears to program the
HomeLink
t
Universal
Transmitter but does not
activate the garage door.
•
The garage door opener was
manufactured after 1995.
Follow these steps to train a
garage door with the rolling code
feature:
1. Locate the training control on
the garage door opener receiver.
Refer to the garage door opener
manual or call 1–800–355–3515 if
there is difficulty locating the
training control.
2. Press the training control on the
garage door opener receiver until
the training light (next to the
control) begins to flash (1-2
seconds).
Controls and features
45
Содержание 1998 Navigator
Страница 183: ...2 5 3 4 1 Capacities and specifications 183 ...