Section
Page
- C8
- 240F
MAY - 01
Copyright 2001
Printed in U.S.A.
FORM 403122
MODEL NO. 84960, 84961, 84962
HYDRAULICALLY OPERATED
GREASE PUMP-
SERIES "B"
DESCRIPTION
Models 84960, 84961 and 84962 are
hydraulically operated grease pumps
designed for centralized lubrication
systems on off-road equipment which
utilizes 24VDC power sources.
OWNER/OPERATOR
RESPONSIBILITY
It is the owner/operator responsibility to
properly use and maintain this
equipment.
The instructions and warnings
contained in this manual shall be read
and understood by the owner/operator
prior to operating this equipment.
If an owner/operator does not
understand English, the contents of
this manual shall be explained in the
owner/operator native language to
assure the owner/operator
comprehends.
It is the owner/operator responsibility to
maintain the legibility of all warning
and instruction labels.
The owner/operator shall retain this
manual for future reference to
Important warnings, operating and
maintenance instructions.
SPECIFICATIONS
POWER REQUIREMENTS: SV1 & SV2= .6 Amps @ 24 VDC each
RATIO(See Note in Fig. 2)
16:1
INPUT PRESSURE
300-3500 P.S.I.
INPUT FLOW @ 30 CYCLES PER MINUTE
1.0 G.P.M.
MAXIMUM HYDRAULIC TEMP.
210° F
OUTPUT PRESSURE
7500 P.S.I. MAX.
OUTPUT FLOW @ 30 CYCLES PER MINUTE
11 CU. IN./MIN.
AMBIENT TEMP.
-40° TO +135° F
SEALS
POLYURETHANE AND NITRILE
FILTRATION REQUIRED
10 MICRON
Failure to heed the following warnings
including misuse, over pressurizing,
modifying parts, using incompatible
chemicals and fluids, or using worn or
damaged parts, may result in
equipment damage and/or serious
personal injury.
Do not exceed the stated maximum
working pressure of the pump or of
the lowest rated component in your
system.
Do not alter or modify any part of this
equipment.
Do not attempt to repair or
disassemble the equipment while
the system is pressurized.
Make sure all fluid connections are
securely tightened before using this
equipment.
Always read and follow the fluid
manufacturers recommendations
regarding fluid compatibility, and the
use of protective clothing and
equipment.
Check all equipment regularly and
repair or replace worn or damaged
parts immediately.
