C-1
ACCESSORIES
FIELD INSTALLED OPTIONS / ACCESSORIES
K2641-2 FOUR WHEELED STEERABLE YARD TRAILER
- For in
plant and yard towing. Comes standard with a Duo-Hitch™, a 2” Ball
and Lunette Eye combination Hitch.
K2636-1 TRAILER -
Two-wheeled trailer with optional fender and
light package. For highway use, consult applicable federal, state, and
local laws regarding possible additional requirements. Comes stan-
dard with a Duo-Hitch™, a 2” Ball and Lunette Eye combination
hitch. Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
K1898-1 SPARK ARRESTOR -
Easily mounts to standard muffler.
K704 ACCESSORY SET
- Includes 35 ft. (10m) of electrode cable
and 30 ft. (9.1m) of work cable, headshield, work clamp electrode
holder. Cables are rated at 400 amps, 100% duty cycle.
K4268-1
125 ft (30.4m)
REMOTE CONTROL -
Portable control
provides same dial range as the output control on the welder. Second
adjustment knob sets the low end setpoint for increased resolution.
Has a 6 pin plug for easy connection to the welder.
K802N POWER PLUG KIT
- Provides four 120 volt plugs rated at 20
amps each and one dual voltage, full KVA plug rated at 120/240 volts,
50 amps.
K802R POWER PLUG KIT
- Provides four 120 volt plugs rated at 15
amps each and one dual voltage, full KVA plug rated at 120/240 volts,
50 amps.
T12153-9 50 AMP, 120/240V POWER PLUG (1-Phase)
T12153-10 50 AMP, 240V POWER PLUG (3-Phase)
K1816-1 FULL KVA ADAPTER KIT -
Plugs into the 120/240V NEMA
14-50R receptacle on the case front (which accepts 4-prong plugs)
and converts it to a NEMA 6-50R receptacle, (which accepts 3-prong
plugs.) For connection of Lincoln equipment with NEMA 6-50 Plug.
K4212-1 VRD Kit -
Provides additional safety in the CV-Wire Welding
mode for environments with a higher risk of electrical shock. Reduces
the open circuit voltage at the output terminals when not welding.
K4213-1 Cold Weather Kit -
For starting and operation in extreme
cold weather conditions down to -40˚ F (-40˚C) (with use of 0W40
synthetic oil and arctic fuel). Includes 120V AC pan heater and radia-
tor grill tarp.
WIRE FEEDER OPTIONS
K2613-5 LN-25 PIPE PORTABLE WIRE FEEDER -
The MAXTRAC
®
wire drive enhances performance, while the
replacement case, and many other upgrade options that can be
installed in less then five minutes aid in the serviceability.
KP1697-5/64 Drive Roll Kit-
Includes: 2 polished U groove drive
rolls, outer wire guide and inner wire guide for solid core wire. (Used
on LN-25 Pro)
KP1697-068 Drive Roll Kit-
Includes: 2 polished U groove drive
rolls, outer wire guide and inner wire guide for solid core wire.
(Used on LN-25 Pro)
KP1696-1 Drive Roll Kit-
Includes: 2 V groove drive rolls and
inner wire guide for Steel Wires. (Used on LN-25 Pro)
K449 LN-25
- Includes internal contactor for across the arc operation
(no control cable). Provides “cold” electrode until gun trigger is
pressed. Includes gas solenoid.
TIG OPTIONS
K1783-9 Pro -Torch
®
PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with valve for gas
flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories you need to
start welding. Parts kit provides collets, collet bodies, a black cap,
alumina nozzles and tungstens in a variety of sizes, all packaged
in an easy to carry reclosable sack.
K870 Foot Amptrol
®
K963-3 Hand Amptrol
®
K2535-1 Precision TIG 225 Ready-Pak(For AC TIG)
K2350-2 Invertec
®
V205-T AC/DC One-Pak™ Package
(For AC TIG)
PLASMA CUTTING
K2807-1 Tomahawk® 625
Cuts metal using the AC generator power from the engine driven
welder. Requires the T12153-9 Full KVA Power Plug (1-phase).
CROSS COUNTRY 300
