GOGGLE OPERATION/FEATURES
ON/MODE Button
•
ON-OFF
(Lens will automatically darken when arc is present)
The Auto-Darkening goggle will automatically turn on, the digital display
control will activate, and the goggles will be ready for use. It is
recommended that the user review the goggle settings prior to use. The
welding goggles will automatically turn off after a half hour of no use.
•
MODE CONTROL
Short press of the ON/MODE
button to select the mode
appropriate for the work
activity:
Weld Mode
− used for most
welding applications.
Push "FUNC" button to
adjust shade number,
sensitivity, and delay settings
before welding. In this mode,
the lens turns to dark
immediately when you start
welding.
Cutting Mode
− used for
cutting applications.
Push "FUNC" button to adjust shade number, sensitivity, and delay
settings before cutting.
Grind Mode
− used for grinding applications.
In this mode the lens shade is fixed shade No. 4. Shade number,
sensitivity, and delay settings cannot be adjusted when in grind mode.
Test Button
Press and hold test to preview shade selection before welding. When released
the viewing window will automatically return to the light state (3.5 Shade).
Battery Indicator
The symbol
shows the current state of the battery. The volume of batteries
has four level symbols (See Figure 1). The symbol
appears on the display
screen before 1 to 2 days of battery life remains, the CR2450 lithium battery
should be replaced at this time. The symbol of the Battery Indicator is not real-
time and is updated shortly after pushing the ON/MODE button.
5
