OPERATING INSTRUCTIONS
HEADBAND ADJUSTMENT:
Headband Tightness is adjusted by loosening
or tightening the elastic band about the two adjustment clips.
HEADBAND REMOVAL:
Locate the hinges on the Auto-Darkening Goggle
and pull the hard plastic connection of the headband toward the opening in
the hinge. To insert a new headband simply snap the connection back into
the opening of the hinge. See images showing Step 1 and Step 2 for a closer
view of the connection.
HEADCOVERING ADJUSTMENT:
To adjust the headcovering about the
neck and lower face, locate the two straps on either side shown in the image
on the left. Pull the straps to the preferred tightness then use the hook and
loop fasteners to secure the fit as shown in the center and right images.
4
Step 1
Step 2
Hinge
Hard Plastic
Connection
