2
11
Replacing the 4x00 X-Axis Motor Belt
DOC #:7301-0-US70-111318-AM-01-02
Replacing the 4x00 X-Axis Motor Belt
Part 4:
Removing the Gantry Motor Belt.
Step 1:
Loosen the four motor screws with a 9/64 Allen Wrench in each of the cor-
ners as shown below in Fig. 17, making sure to not fully remove them from
the plate.
Fig. 17: Loosening the four screws.
Step 2:
Loosen the set screw with a 5/64 Allen Wrench as shown in Fig. 18 making
sure to not fully remove it from the plate. The motor should be able to slide
so the belt tension is relieved
Fig. 18: Loosening the set screw.
