Lincoln Electric TITAN 701 II Series, Руководство по эксплуатации

Страница: 50 / 74

Page 50 Titan TM 701 Series II IM 6008A
Faults, Causes and Remedies
7.1 Diagnosis Chart
Not declutched (where possible)
Operation I
Below starting limit temperature
I
Engine shut-off lever not in stop position (shut-off magnet defective)
I
Oil level too low
T
Oil level too high
L
Excessive inclination of engine
I/A
Engine predominantly operated at lower load
I
Air cleaner clogged / turbocharger defective
Combustion air
R
Air cleaner service switch / indicator defective
I/R
LDA defective (leak in connecting line) only with charged engines
I/R
Exhaust counter pressure too high
I
Charge-air line leaking, only with charged engines
I
/
A
Charge-air line leaking, only with charged engines
Cooling system I/C
Charge air cooler clogged
I/C
Oil cooler air and/or oil side clogged
I/C
Cooling fan or exhaust thermostat defective, V-belts ripped or loose
I/R
Cooling air temperature rise / heating short circuit
I
Cooling air fins loose, cracked or missing
I
Fault Remedy
Engine fails or is difficult to start Inspect I
Engine starts but runs unevenly or stalls Adjust A
Engine overheats. Temperature monitor gives warning Replace R
Engine gives poor performance Clean C
Engine not firing on all cylinders Top up T
Engine has little or no oil pressure Lower level L
Engine oil consumption excessive
Engine smokes - blue
- white
- black
Cause Section
•
•
•
•
•
• •
• • •
•
•
•
•
• •
•
•
• • • •
•
• •
•
•
• •
•
•
•
• •
•
•
•
•
•
•
Fault Remedy
Engine fails or is difficult to start Inspect I
Engine starts but runs unevenly or stalls Adjust A
Engine overheats. Temperature monitor gives warning Replace R
Engine gives poor performance Clean C
Engine not firing on all cylinders Top up T
Engine has little or no oil pressure Lower level L
Engine oil consumption excessive
Engine smokes - blue
- white
- black
Cause Section
Battery defective or discharged
Electrics I
Electric cable connections to starter electrical system loose or oxidised
I
Starter defective or pinion does not engage
I
Oil pressure switch/oil pressure gauge defective
I/R
Incorrect valve clearance
Engine A
Leaking injection line
I/C
Vent line clogged
I/C
Flame glow system/heating pipe defective
I/R
Injection valve defective
I/R
Air in fuel system
P/R
Fuel filter/fuel precleaner clogged
I/C/R
Oil filter defective
R
Incorrect SAE class or grade of engine lube oil
R
Compression pressure too low
I
Oil in combustion chamber
I/C
• •
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
• •
•
•
•
• • •
•
•
• • •
•
• •
•
• •
•
•
•
• • •
•
•