Lincoln Electric SPEEDTEC 215C AUS, Руководство оператора

Страница: 8 / 21

English 6 English
Controls and Operational Features
Figure 1.
1. Left Knob: The value of parameter in the upper left
side of display [2] is adjusted.
2. Display: Parameters of welding process are shown.
3. User Button (left): Button function could be set:

Advanced menu:

Recalls advanced menu (default)

Recalls user memory.

Inductance.

Run-in WFS.

Burnback.

Basic menu – changes basic menu for advanced
menu.
4. EURO Socket: For connecting a welding gun (for
GMAW / FCAW-SS process).
5. Positive Output Socket for the Welding
Circuit: For connecting an electrode holder
with lead / work lead.
6. Negative Output Socket for the Welding
Circuit: For connecting an electrode holder
with lead / work lead.
7. Power Switch ON/OFF (I/O): Controls the input
power to the machine. Be sure the power source is
connected to the mains supply before turning power
on ("I"). After input power is connected and the power
switch is turned on, the indicator will light up to
indicate the machine is ready to weld.
8. Escape Button (right):

Cancels an action / exit menu.

Locks and unlocks knobs and buttons on the
panel (press and hold button for 4 seconds).
9. Set Knob: Type of welding procedure and welding
settings is changed by this knob.
10. Right Knob: The value of parameter in the upper right
side of display [2] is adjusted.
20
12
11
Figure 2.
11. Gas Connector: Connection for gas line
WARNING
The welding machine supports all suitable shielding gases
at a maximum pressure of 5,0 Bar.
12. Power Lead with Plug (5m): Power lead with plug is a
standard equipment. Connect the power lead with
plug to the main supply before turning power on.
Figure 3
13. Wire Spool Support: Maximum 15kg spools. Accepts
plastic, steel and fiber spools onto 51mm spindle.
14. Spooled Wire (for GMAW / FCAW-SS): The machine
does not include a spooled wire.