background image

Now Available...12th Edition
The Procedure Handbook of Arc Welding

With over 500,000 copies of previous editions published

since 1933, the Procedure Handbook is considered by many to 
be the 

Bible

 of the arc welding industry.

This printing will go fast so don

t delay. Place your 

order now using the coupon below.

The hardbound book contains over 750 pages of welding

information, techniques and procedures. Much of this material 
has never been included in any other book.

A must for all welders, supervisors, engineers and

designers. Many welding instructors will want to use the book
as a reference for all students by taking advantage of the low
quantity discount prices which include shipping by
4th class parcel post.

$15.00 postage paid U.S.A.  Mainland

How To Read Shop Drawings

The book contains the latest information and application

data on the American Welding Society Standard Welding
Symbols. Detailed discussion tells how engineers and
draftsmen use the 

short-cut

 language of symbols to pass

on assembly and welding information to shop personnel.

Practical exercises and examples develop the reader

s ability

to visualize mechanically drawn objects as they will appear
in their assembled form.

187 pages with more than 100 illustrations. Size 8-1/2

  x 11

Durable, cloth-covered board binding.

$4.50 postage paid U.S.A. Mainland

New Lessons in Arc Welding

Lessons, simply written, cover manipulatory techniques;

machine and electrode characteristics; related subjects,
such as distortion; and supplemental information on arc
welding applications, speeds and costs. Practice materials,
exercises, questions and answers are suggested for each 
lesson.

528 pages, well illustrated, 6

 x 9

 size, bound in simulated,

gold embossed leather.

$5.00 postage paid U.S.A. Mainland

Need Welding Training?

The Lincoln Electric Company operates the oldest and

most respected Arc Welding School in the United States at its
corporate headquarters in Cleveland, Ohio. Over 100,000 stu-
dents have graduated. Tuition is low and the training is 

hands on

For details write: 

Lincoln Welding School
22801 St. Clair Ave. 
Cleveland, Ohio 44117-1199.

and ask for bulletin ED-80 or call 216-383-2259 and ask for the
Welding School Registrar.

Lincoln Welding School

BASIC COURSE

$700.00

5 weeks of fundamentals

There is a 10% discount on all orders of $50.00 or more for shipment at one time to one location.
Orders of $50 or less before discount or orders outside of North America must be prepaid with charge, check or money order in U.S. Funds Only.
Prices include shipment by 4 th Class Book Rate for U.S.A. Mainland Only. Please allow up to 4 weeks for delivery.
UPS Shipping for North America Only. All prepaid orders that request UPS shipment please add:

$5.00

For order value up to $49.99

$10.00

For order value between $50.00 & $99.99

$15.00

For order value between $100.00 & $149.00

For North America invoiced orders over $50.00 & credit card orders, if UPS is requested, it will be invoiced or charged to you at cost.
Outside U.S.A. Mainland order must be prepaid in U.S. Funds. Please add $2.00 per book for surface mail or $15.00 per book for air parcel post shipment.
METHOD OF PAYMENT: (Sorry, No C.O.D. Orders)

CHECK ONE:

Name:

_______________________________________________

Please Invoice (only if order is over $50.00)

Address:

_______________________________________________

Check or Money Order Enclosed, U.S. Funds only

_______________________________________________

Credit Card - 

Telephone: _______________________________________________

Signature as it appears on Charge Card:

Account No. 

|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|

Exp Date 

|_|_| |_|_|

______________________

Month

Year

USE THIS FORM TO ORDER:

Order from:

BOOK DIVISION, The Lincoln Electric Company, 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199

BOOKS OR FREE INFORMATIVE CATALOGS

Telephone: 216-383-2211 or, 

for fastest service, FAX this completed form to: 216-361-5901

.

Lincoln Welding School

Titles:

Price

Code

Quantity

Cost

(ED-80)

New Lessons in Arc Welding

$5.00

L

Seminar Information

Procedure Handbook 

Twelfth Edition

$15.00

PH

(ED-45)

How to Read Shop Drawings

$4.50

H

Educational Video Information

Incentive Management

$5.00

IM

(ED-93)

A New Approach to Industrial Economics

$5.00

NA

James F. Lincoln Arc Welding

The American Century of John C. Lincoln

$5.00

AC

Foundation Book Information

Welding Preheat Calculator

$3.00

WC-8

(JFLF-515)

Pipe Welding Charts

$4.50

ED-89

SUB TOTAL

Additional Shipping Costs if any

TOTAL COST

MasterCard

VISA

®

AMERICAN EXPRESS

MasterCard

MasterCard

®

AMERICAN EXPRESS

Содержание PRO 155















































Отзывы: