Lincoln Electric Precision TIG 375 Скачать руководство пользователя страница 32

Страница: 32 / 143

OPTIONAL EQUIPMENT

FACTORY INSTALLED OPTIONS

The basic Precision TIG 375 machine is factory

equipped with:

• K1839-1 Precision TIG Advanced Control Panel.

Provides 2/4-step trigger with adjustable Pulser con-

trols and Down slope timer for TIG welding. Also

includes adjustable Hot Start and Arc Force internal

panel controls for stick welding and other user selec-

table features.

• Power Factor correction capacitor.

• A 3/8" Adapter (S20403-4) for air cooled torch con-

nection of a PTA-9 or PTA-17.

Accessories that are factory installed with the

Domestic model (K1833-1) to make up the Domestic

Welding Package (K1903-1) include:

• K1828-1

Under-Cooler Cart

• 3100211

Harris Argon Flow Regulator with 10’

hose.

• K870

Foot Amptrol

• K1784-4

25’ PTW-20 water-cooled TIG Torch

• K918-2

Zippered Torch Cover

• KPi510

Parts Kit for Torch

• K2150-1

Work Lead Assembly

See below for more detailed descriptions.

FIELD INSTALLED OPTIONS

The following Options/Accessories are available for the

Precision TIG 375 and are installed per instructions in

this manual and/or provided in the package:

• K1828-1 Under-Cooler Cart

Includes a "cooler-in-a-drawer" with hoses and a

lockable storage drawer on a dual bottle undercar-

riage (see below).

• K1869-1 Undercarriage

Includes a dual bottle rack with chain and an under-

carriage with 5" front casters,10" rear wheels and a

handle.

• K1830-1 Water Solenoid Kit

Provides for stopping flow of external water supply.

Connects to coolant inlet and cooler receptacle of

Precision TIG.

(Cannot be used with a water cooler.)

• K870 Foot Amptrol

Single pedal foot activation of arc start switch and

output control, with 25’ plug cable.

• K870-1 Start Pedal Foot Amptrol

Independent start pedal on control pedal provides

two-stage foot action to easily feel start switch clo-

sure at minimum output level for enhanced arc start

and crater-fill control. Provided with adjustable, or

removable heel stop and 25’ plug cable.(Refer to

Figure B.5)

• K963-1,-2 Hand Amptrol

Fastens to torch for convenient thumb activation of

arc start switch and output control with 25’ plug

cable:

K963-1 is for PTA-9,-17 and PTW-20 Torches.

K963-2 is for PTA-26 and PTW-18 Torches.

• K814 Arc Start Switch

Needed for TIG welding without an Amptrol.

Includes 25’ plug cable, and attaches to torch for

convenient finger control.

• Magnum® PTA and PTW Series Torches

All Air Cooled or Water-Cooled Magnum® TIG

Torches may be used with the Precision TIG 375.

Connection adapters are only required for Air-Cooled

Torches (Refer to Diagrams on A-7):

K2166-1 7/8” Torch Connector for PTA-26 (one

piece)

K2166-2 1/2” stud Connector for PTA Torch (two-

piece).

K2166-3 3/8” TIG Torch Connector for PTA-9,-17

(one piece). (Included as S20403-4 with Precision

TIG models.)

• 3100211 Harris Argon Flow Regulator (Includes 10’

hose.)

• K2150-1 Work Lead Assembly

15ft. 2/0 cable with 1/2" stud lug and work clamp.

C-2

ACCESSORIES FOR CODES BELOW 11000

C-2

PRECISION TIG 375

Содержание Precision TIG 375
















































































































































Результаты поиска

Содержание Precision TIG 375

Отзывы:

Lincoln Electric Precision TIG 375, Руководство по обслуживанию, Страница: 32 / 143

Результаты поиска

Содержание Precision TIG 375

Отзывы: