English 6 English
12. Gas hose.
13. Work Lead.
14. Cover bracket: To intall cooler cable holder bracket.
15. Quick Connect Coupling: Coolant inlet
(supplies cool coolant to the torch/gun).
16. Quick Connect Coupling: Coolant outlet
(takes warm coolant from torch/gun).
17. Supply Plug: For CO2 gas heater kit (see
“Accessories” chapter).
18. Power Lead (5m): Connect the supply plug to the
existing input cable that is rated for the machine as
indicated in this manual, and conforms to all
applicable standards. This connection shall be
performed by a qualified person only.
19. Gas Connector: Connection for gas line.
20. Gas Flow Regulator Plug: Gas flow regulator can be
purchased separately (see “Accessories” chapter).
Internal Controls
Figure 3.
21. Cold Inch/ Gas Purge Switch: This switch enables
wire feeding or gas flow without turning on output
voltage.
22. USB Receptacle Type A:
For USB memory stick connection. For machine
software update and service purpose.
23. Spooled Wire (for GMAW / FCAW): The machine
does not include a spooled wire.
24. Fuse F1: Use the 2A/400V (6,3x32mm) low blow
fuse
25. Wire drive feeding system: 4-Roll wire drive
mechanisms with quick-change feed rolls.
26. Terminal Block of Changing Polarity Plug (for GMAW
/ FCAW-SS process): This terminal block enables to
set the welding polarity (+ ; -), which will be given at
the welding gun
27. Wire Spool Support: Maximum 16kg spools. Accepts
plastic, steel and fiber spools onto 51 mm spindle.
Note:
Plastic Brake Nut has a Left-hand thread.