Lincoln Electric MAXsa 10 Скачать руководство пользователя страница 7

Страница: 7 / 51

PRODUCT DESCRIPTION

MAX

SA™

10 CONTROLLER

PRODUCT DESCRIPTION

GENERAL PHYSICAL DESCRIPTION

• The MAXsa™ 10 CONTROLLER is a user interface and a feeder

controller. The control is used to set all welding parameters
and control any travel mechanisms. High-speed digital cables
connect the control, wire drive, and the Power Wave power
source together.

• The MAXsa™ 10 CONTROLLER is a self-contained control box

designed to control the entire weld arc at one location.

• The user interface utilizes alphanumeric displays for advanced

text messaging providing the end user with an intuitive inter-
face allowing for easy set up and real-time control of all weld-
ing parameters.

• An eight button memory section has been included which pro-

vides easy storage and recall of stored welding parameters.

• The user interface can be removed from the control box and

connected as a Pendant for remote control near the arc.

GENERAL FUNCTIONAL DESCRIPTION

• The MAXsa™ 10 CONTROLLER is one of the most versatile

user interfaces ever created. Easy to use features make it a
snap to adjust the arc for specific preferences.

• The user interface brightly displays essential welding informa-

tion. Use it to quickly adjust weld settings, arc starting para-
meters, arc end parameters and set-up information.

• The memories allow for up to eight weld schedules to be

stored and quickly recalled. The user interface allows for mul-
tiple levels of limits and lockouts.

• Digital communications to the power source provide the most

accurate and reliable operation possible.

• When the MAXsa™ 10 CONTROLLER is coupled to the Power

Wave

AC/DC 1000 SD welding power source, the result is a

welding system with the best arc performance on the market.

DEFINITIONS OF WELDING MODES

NON-SYNERGIC WELDING MODES

• A Non-synergic welding mode requires all welding process

variables to be set by the operator.

SYNERGIC WELDING MODES

• A Synergic welding mode offers the simplicity of single knob

control. The machine will select the correct voltage and
amperage based on the wire feed speed (WFS) set by the oper-
ator.

• See the Power Wave

AC/DC 1000 SD Operator’s Manual for

available weld modes.

COMMON WELDING ABBREVIATIONS

SAW

• Submerged Arc Welding

WIRE FEEDER

FLUX HOPPER

CONNECTOR

TRAVEL

CARRIAGE

CONNECTOR

GRAPHIC SYMBOLS THAT APPEAR ON

THIS MACHINE OR IN THIS MANUAL

CONTROLLER

ARCLINK INPUT

CONNECTOR

PENDENT

ARCLINK

CONNECTOR

Содержание MAXsa 10




















































Результаты поиска

Содержание MAXsa 10

Отзывы:

Похожие инструкции для MAXsa 10

Бренды по названию

Популярные бренды

Lincoln Electric MAXsa 10, Руководство оператора

Результаты поиска

Содержание MAXsa 10

Отзывы:

Похожие инструкции для MAXsa 10

Бренды по названию

Популярные бренды