Lincoln Electric Magnum PRO 250 LX, Руководство оператора

Страница: 8 / 24

2
INSTALLATION MAGNUM PRO 250 LX & LX GT SPOOL GUN
UNPACkINg THE SPOOL gUN
Safety Precautions
• Read "Safety Precautions" in the Operating Manual before
proceeding. Only personnel that have read and
understood the Operating Manual should install and
operate this equipment.
• Power source must be turned "OFF" and power leads
disconnected when installing this unit.
Carefully unpack your Magnum PRO 250 LX Series Spool Gun and
attach the Barrel Assembly, and make sure you have all of the
parts listed.
KP2745-364AT - Contact Tip 3/64" (1.2mm) Included
KP2747-1A - Aluminum Gas Diffuser Installed
KP2743-1-62RA - Aluminum Gas Nozzle, Installed
1/8" Recess, .625" ID
KP2518-2 - U-Groove Drive Roll Installed for
(.030"-.035" and 3/64") 3/64"
KP3682-180 - 180 Degree Barrel Installed
KP2879-5 - 180 Degree Barrel Liner Installed
KP2773-1 - Insulator, 550A Installed
1. GAS NOZZLE
2. CONTACT TIP
3. GAS DIFFUSER
4. 550A INSULATOR
5. NECK
6. PRESSURE ROLLER
7. DRIVE ROLL
8. TRIGGER
9. ELECTRODE WIRE SPOOL COVER
10. FRONT HANDLE
11. POWER CABLE
12. GAS HOSE
13. 7 PIN CONTROL PLUG FOR TRIGGER, WIRE SPEED MOTOR
14. CABLE ASSEMBLY
15. WIRE SPEED CONTROL
WARNING
1
2
3 4
5
6
7
13
12
11
14
8
10
15
9