English
English
13
Setting and Configuration Menu
To access the menu, press the the left [27] and the right
[25] buttons simultaneously.
Parameter Selection Mode – the Parameter Name on
the left display [17] blinking.
Parameter Change Value Mode – the parameter value
on the right display [20] blinking.
WARNING
To exit the menu with changes saved, press the left [27]
and the right [25] buttons simultaneously.
After one minute of inactivity the Menu without saving
will also exit.
Table 5 Interface Components and functions when the Settings and Configuration Menu is active.
17
20
23
25
26
27
30
Figure 7
Functions of Interface Components
17. Parameter Name.
20. Parameter Value.
23. Changing Parameter Value.
25.
Entering to parameter.edition.
Confirm Parameter Value change.
26. Setting and Device Configuration
Menu is active.
27. Cancelation / Exit.
30. Parameter Selection.
BA
SE
L
E
VE
L
AD
V
A
N
C
ED
L
EVE
L
Figure 8
User has access to two menu levels:
Basic Level – basic menu which is connected with
settings of Welding Parameters.
Advanced Level – advanced menu, configure device
menu.
Note:
The availability parameters in the Setting and
Configuration Menu depend on the selected welding
program / welding process.
Note:
After the device has been restarted remembers
the last selected welding program with its parameters.
Basic Menu (settings related to the welding’s
parameters)
The Basic Menu includes the parameters described in
Table 6.
