Lincoln Electric INVERTEC 275TP, Руководство оператора, Страница: 12 / 27

English 10 English
Welding GTAW process
To select, TIG mode process, select the GTAW icon
and push the knob button.
Home menu
Figure 6
1. “Main Menu” access, push this button to go back.
2. Push button to configure all parameter of current
process.
Turn the knob to adjust the welding current value.
3. “Memories” access. See dedicated Section.
Configure Parameters
Arc Strike
Figure 7
To select the type of arc striking: HF or Touch Start,
select the corresponding menu and push the Knob.
Figure 8
Select the arc strike type desired.
Weld sequence configuration
Figure 9
Select “Weld Sequence” menu to configure the
following parameters:

Pre-Gas time

Start current

Ramp-up time

Welding current

Ramp-down time

End current

Post-gas
Figure 10
For each parameters, use the knob to reach
corresponding part of the weld sequence and push
knob button.
1
2
3