English 17 English
Table 1 Error codes
Error code
Symptoms
Cause
Recommended Course of Action
36
The machine has shut
down because it has
overheated.
System detected a temperature
level beyond the normal system
operating limit.
Be sure process does not exceed duty
cycle limit of the machine.
Check the setup for proper air flow around
and through the system.
Check that the system has been properly
maintained, including removal of
accumulated dust and dirt from the intake
and outlet louvers.
User interface show information when
machine will be cooled down. To continue
welding operation Please press left knob
or start welding operation by the torch
trigger
37
The machine has shut
down because it has
overheated.
System detected a temperature
level beyond the normal system
operating limit.
Be sure process does not exceed duty
cycle limit of the machine.
Check the setup for proper air flow around
and through the system.
Check that the system has been properly
maintained, including removal of
accumulated dust and dirt from the intake
and outlet louvers.
User interface show information when
machine will be cooled down. To continue
welding operation Please press left knob
or start welding operation by the torch
triggerWait a while to allow power source
to cool
WARNING
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
