English 9 English
Home Menu description
Figure 5
1. In “Primary Settings” area, the type of process and
corresponding information will be indicated like type
of arc striking for TIG and type of MMA mode (Soft,
Crisp etc …)
If “Guided Setup Mode” is selected, all inputs will be
displayed in the section.
2. “Status Bar” give additional information like Trigger
Interlock selection, remote control status.
3. “Preset Current” indicates the current value
configured by welder and, during welding, welding
current value.
4. “Voltage”: Indication of voltage welding voltage.
5. “Secondary Settings” allow to user to see the current
values of weld sequence parameters.
6. “Contextual Buttons / Encoders Labels”, informs the
user of features associated to the knob and buttons
Welding GTAW process
To select, TIG mode process, select the GTAW icon and
push the knob button. Only Touch start
Home menu
Figure 6
1. “Main Menu” access, push this button to go back.
2. Push button to configure all parameters of current
process. Turn the knob to adjust the welding current
value.
3.
“Memories” access. See
Primary settings
Status Bar
Preset current
Voltage
Secondary settings
Contextual Buttons / Encoders Labels
1
2
3
