Lincoln Electric Growth Series, Инструкция по сборке

Страница: 45 / 94

Assembly Guide
35
Step B1: Run crossover Ethernet cable
Using an Ethernet cable connection, the Torchmate Accumove2 receives commands from the VMD (CAM)
software that runs on the laptop (or PC) . To make it easy to begin operations, an Ethernet crossover cable
(red) is provided that requires no other network devices to establish communication.
• The Accumove2 CNC controller comes with a power supply and a red crossover Ethernet
communication cable.
• NOTE: A regular Ethernet cable cannot be used in place of the crossover cable ,
because the wires arrive in a different order on the connectors. Be sure to use the red
crossover Ethernet cable to connect directly from the computer to the Accumove2 CNC
controller.
• Run the red crossover cable from the computer's Ethernet port to the active (right-hand)
port on the Accumove2 CNC controller box. The left-hand port is inactive for connecting to
the laptop (or PC).
Required parts /
components
Instructions
Qty Part Description Part #
1 Accumove2 BK1250-200000
1 24V 6.67A DC power supply, TMS-400-0003-02
1 AC power cable TMS-402-0069-01
1 Laptop or PC with Microsoft Windows
8, Windows 7, Vista, or XP
(separate
purchase)
1 Crossover Ethernet cable TMS-103-5000-07
Direct connection
with the crossover
cable
Only use the
right-hand
Ethernet port on
the Accumove2
controller
Inactive port
Active port
Illustrations