Lincoln Electric Air Vantage 600, Руководство пользователя

Страница: 10 / 52

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289 Local: 250-740-3200
Fax: 1-250-740-3201
8
The compressor system is under sufficient pressure
that a leak could force the air/oil mixture through the
skin directly into your bloodstream. This will cause
death.
Never adjust or attempt to make any repairs to the
compressor system while engine is running. Components
and hoses under pressure could separate suddenly and fly
out and cause serious injury or death.
Never perform maintenance procedures on the system until
the Welder/Compressor has been shut down for at least 5
minutes to ensure the system is fully depressurized. After 5
minutes open the discharge valve to ensure the system is
depressurized. Failure to depressurize the system could
cause parts to separate explosively. Flying parts could cause
serious injury or death. Air/oil mixture could be sprayed out
with sufficient force to penetrate the skin, which could cause
serious injury or death.
The compressor and the compressor system gets very hot
during operation, contact with the components or the oil can
cause serious burns. Allow sufficient time for the system to
cool before performing service
Components and hoses under pressure could separate
suddenly and fly out and cause serious injury or death. If
equipped the auxiliary air tank must be drained before
servicing any components in the compressor system.
Pressure regulator and/or lubricator
The compressor can produce air pressures up to
approximately 175 PSI (1207 kPa). It is the responsibility of
the user to know the pressure and air flow requirements of
the tools powered by the air compressor system. An
appropriate air pressure regulator and lubricator can be
externally installed to the outside of the pressure supply
valve. Failure to regulate the air pressure may cause
damage to the tool.