Lincoln Electric AC-235 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 28

Lincoln Electric AC-235 Скачать руководство пользователя страница 1

AC-235
WELDING POWER SOURCE

by

IM556

May, 2004

Contents

Page

Safety Precautions ...............................................................................................2

Installation and Operating Instructions

for AC-235 ...................................................................................................7
Includes safety, installation, operating instructions
and parts lists.

Learning to Weld ...............................................................................................11

Using the Carbon Arc Torch..............................................................................18

Includes for heating metal, welding aluminum or
brazing with an arc torch.

Selecting Electrodes ..........................................................................................23

Brief descriptions of the types and operating
data for all Lincoln electrodes.

Welding Books and Teaching Aids ...................................................................25

• Sales and Service through Subsidiaries and Distributors Worldwide •

Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

• World's Leader in Welding and Cutting Products •

Copyright © 2004 Lincoln Global Inc.

This manual covers equipment which is no
longer in production by The Lincoln Electric Co.
Specifications and availability of optional
features may have changed.

1
2
3
...
»

Содержание AC-235





























Отзывы:

Нет отзывов