Lincoln Electric 8695 4791, Инструкция по эксплуатации

Страница: 30 / 42

OPTITOME² HPC III
24
The machine is now ready to operate
The
HPC3 Digital Process HPi
can manage cutting settings depending on the machine and the material to
cut associated with part programs.
The workpiece programs are taken from standard shapes or imported from a CAD system
The association of a part program and cutting parameters constitutes a job, which can be saved.
Each program and each job can be copied, edited or exported.
There are several ways to cut a part:
•
Select a job to make a part that has already been made
•
Select a program, then the material and cutting performance
•
Select a standard shape, enter its dimensions and then the material and cutting performance (for a new
workpiece)
For more details about the use of the
HPC3 Digital Process Hpi,
, refer to documentation no
8695 4995.
2
1
On the HMI (Human Machine Interface), documentation 86954995 is accessible on level 2 and level 1
depending on the settings.
To access the documentation, press button (1) , then button (2) . Close the PDF file to go back to the HMI
screen.