OPERATION
APEX
®
3 SERIES MIG PENDANT MANUAL
B-32
For this example the pass has been named 1Root.
Continue to save programs to this base until the
required passes are all saved.
After saving the required passes they are all displayed
under the base – see
FIGURE 42 – Full Program Base
.
Pressing the steering knob will expand the program
base.
Saving Program Updates
A fourth level selection, Program Update is available
when changes are made to Program Passes associat-
ed with a Program Base.
When changes have been made to one or more
Program Passes, the Program Base containing the
changed Program Passes is selected and the SAVE
button is pressed, the Program Update option
becomes available on the SAVE screen.
If changes were made to one or all of the Program
Passes associated with the Program Base “Steel 2in
Pipe”, selecting the Program Base and pressing the
SAVE button would product the following screen:
Selecting Program Update and pressing the OK but-
ton on this screen will save the changes made to all
Program Passes at one time rather than requiring each
Program Pass to be saved separately.
FIGURE 42 - Full Program Base