OPERATION
APEX
®
3 SERIES MIG PENDANT MANUAL
B-11
Jog Buttons
The following buttons and options are available from
the Jog Menu.
1. GAS PURGE
•
Short Press –
Purge welding gas for 3 seconds
•
Hold –
Continually purges welding gas while held
2. COLD FEED FORWARD
•
Short Press –
Feeds wire slightly
•
Hold –
Feeds wire continuously and accelerates
the WFS
3. COLD FEED REVERSE
•
Short Press –
Retracts wire slightly
•
Hold –
Retracts wire continuously and acceler-
ates the WFS. Be sure to keep the spool tight as
wire is retracted
4. HOME
•
Short Press –
Returns the weld head to starting
position on the track. Starting position is deter-
mined by previous weld or test start.
5. EXIT
•
Short Press –
Returns to Idle Screen
6. LEFT TOGGLE (White Border)
•
Short Press –
Travels forward or backward
slightly
•
Hold –
Travels forward or reverse and ramps
travel speed
7. STEERING KNOB
•
Rotate –
Moves the oscillation in and out
•
Short Press –
Centers the oscillation
•
Long Press –
Starts/stops oscillation test
8. RIGHT TOGGLE (Gray Border)
•
Short Press –
Adjusts the torch up and down
•
Hold –
Adjusts the torch up and down and
ramps
adjustment speed
9. WIRE FEED/AMPS
•
No Effect
10. DWELL
•
Short Press –
Navigates to Jog Menu for
oscillation and dwell (short press does the same)
•
11. OSCILLATION
•
Short Press –
Navigates to Oscillation screen
12. TRAVEL/VOLTS
•
No Effect
FIGURE 15 - Jog Menu Screen
13. START/STOP
•
If in TEST, it will run the TEST MODE; if in
WELD, the machine will start the weld
14. SECTOR
•
No Effect
15. RESET*
•
Short Press –
Initiates a system reset
* Important!
This is not an emergency stop button.
Power is still applied to the system.
