Lincoln Electric 12716, Руководство оператора, Страница: 39 / 64

B-18
OPERATION FRONTIER ® 400X
MEMORY MODE OPERATION
The machine features 4 global memories slots, which can
be used to save and recall se
tti
ngs. The operator can use
the MEMORY MODE under the WELD MODE se
tti
ngs or the
four bu
tt
ons labelled 1 – 4 along the bo
tt
om of the user
interface (See Figure B.21)
To save a memory, hold the desired memory bu
tt
on un
ti
l
the screen indicates that the memory has been saved.
To recall a memory, press and release the desired
memory bu
tt
on.
FIGURE B.21
When a memory is selected, the corresponding memory
LED will be lit. If any se
tti
ngs are changed, the LED will
go out. The se
tti
ngs will revert to the saved values if the
memory bu
tt
on is pressed again.
Memory usage with remote – If a memory is saved
with a remote control connected, the remote control
must be connected for the memory to function.
PRODUCTIVITY METRICS
The Produc
ti
vity Metrics screen provides informa
ti
on and
sta
ti
s
ti
cs on how the machine is being u
ti
lized. Five
sta
ti
s
ti
cs are monitored:
FIGURE B.22
In order to reset any of these metrics, rotate the knob
un
ti
l the desired item is highlighted in red. Then, press
and hold the knob on the selected parameter for 5
seconds.
FIGURE B.23
1 4 3 2
?
1
2
3 4
• Arc Hours - Time spent using the machine for
welding.
• Auxiliary Hours - Time spent using the auxiliary
power on the machine.
• Utilization Percentage - Represents how
the percentage of time the machine is being
loaded with respect to the total hours on the
machine.
•
Standby Hours - The number of hours the
machine is in Standby Mode.
• Fuel Saved w/ Auto-Start - The number of US
gallons of fuel saved from utilizing the Auto-
Stop/Start feature.