IS554 ECN3869
2
Please read the following carefully before using this appliance.
Warnings and Precautions
Please ensure that all commissioning checks and initial start-up procedures have taken place.
This manual should be kept in a safe and accessible place for future reference.
This appliance is designed for professional use and must only be operated by qualified personnel.
Please ensure that the appliance is serviced regularly by a suitably qualified engineer.
It is mandatory that all appliances are installed, commissioned and serviced by a qualified and
competent person as defined by the regulations in force in the country of installation (see below).
Failure to comply will invalidate the warranty.
•
Health and Safety at Work Acts
•
IEE regulations
•
BS Codes of Practice
•
Local and National Building Regulations
•
Fire Precautions Act 1971
•
DW172
•
BS6173: 2009
WARNING
•
Competent personnel familiar with the assessment of hazards and risks associated with
industrial ventilation equipment such as fans and air handling units should install this
product.
•
Use lifting equipment which has a suitable safe working load for the SmartVent being lifted.
•
Ensure steps, podium steps, scissor lift or mobile scaffold tower are secure and stable before
use.
•
Make sure the SmartVent is fully secure before removing the support stands.
•
Disconnect the unit from the electricity supply before servicing or undertaking any electrical
maintenance.
•
Parts of this unit may become hot in normal use; suitable precautions must be taken to avoid
accidental contact.
•
A means of disconnection must be incorporated in the fixed wiring having a contact
separation of at least 3.0mm in all poles.
•
A gas interlock (supplied by others) conforming to functions described in CAIS23 and
TB140 must be installed if the SmartVent is to be used over gas appliances.
•
Connection to the premises electrical circuit is via two separate supplies.