IS 607 ECN 4345
Page 7 of 12
Switching on
Refer to Fig 2. With the clam heads in the raised position, turn on the power supply
at the isolating switch; the green neon illuminates indicating power to the appliance.
Turn the relevant thermostat control knobs to the required temperature; the
associated amber
neon’s will illuminate. When the griddle plates reach the selected
temperature, the amber neon
’s will extinguish. Place product onto the griddle plate
and lower the clam heads.
It is important to run the appliance with the heads raised when not cooking.
Keeping the heads raised will greatly extend the longevity of the Teflon sheets,
keep the griddle plate cleaner and less susceptible to burnt oil, whilst also reducing
the risk of the appliance overheating.
Standby
When no product is being cooked, always raise the clam heads. The appliance
may then be left operating at maximum temperature for a quick return to cooking, or
may be turned down to the minimum temperature until required. Independent
controls allow the versatility of both the griddle plate and the raised heads being set
separately according to requirements at the time.
Shutting down
Turn all the control knobs to the ‘Off’ position and switch off at the isolating socket.
Be aware that the appliance will remain hot for some time.
CLEANING
Your Lincat product has a manufacturer’s warranty. This requires you to maintain
and care for your product and follow maintenance instructions. If you fail to maintain
your unit or damage components Lincat may charge you for a warranty repair.
Please check the website for terms and conditions.
Warning: The use of abrasive cleaners is damaging to electrical components.
For this reason, only use warm water with a mild detergent to clean all panels,
taking particular care when cleaning the control facias of both the lower plate and
the clam heads. Do not use abrasive cleaners or cleaners containing chlorine.
After cleaning, dry with a soft cloth.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Empty and clean the fat collection drawer regularly.
Griddle plate cleaning
Stainless steel griddle plate
– scrape off any food residue and wash down with mild
detergent and water. Rinse thoroughly to remove any traces of detergent, and dry.
Aluminium clam plate
– Remove and clean Teflon sheets. Wash aluminium plate if
necessary with mild detergent and water. Rinse to remove traces of detergent and
Содержание Opus 800 OE8210
Страница 5: ...IS 607 ECN 4345 Page 5 of 12 Fig 1...
